Recalls apply to specific production ranges. To see whether a particular car still has an open recall, enter its VIN at nhtsa.gov/recalls. Repairs for safety recalls are free at authorised dealers.
2010 Dodge RAM 2500 recalls
Power train: automatic transmission, lever and linkage, column shift
NHTSA campaign 17V821000 · reported December 20, 2017 · Chrysler (FCA US LLC) · 1,482,874 vehicles potentially affected
- The problem
- Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
- The risk
- Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
- The fix
- Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Fuel system, diesel · Engine and engine cooling: engine, diesel
NHTSA campaign 14V635000 · reported October 8, 2014 · Chrysler Group LLC · 315,325 vehicles potentially affected
- The problem
- Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
- The risk
- If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
- The fix
- Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Steering: linkages, tie rod assembly
NHTSA campaign 13V529000 · reported November 6, 2013 · Chrysler Group LLC · 271,733 vehicles potentially affected
- The problem
- Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 RAM 2500 4X4 and 3500 4X4 trucks, 2008-2012 Dodge RAM 3500 4x2 Cab Chassis, and model year 2008 Dodge RAM 1500 Mega Cab 4x4. The left tie rod assembly may break.
- The risk
- A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
- The fix
- Chrysler notified owners on January 16, 2014 that dealers would inspect vehicles and replace the steering linkage assembly, if necessary. On or about February 27, 2014, Chrysler ceased its recall remedy program due to parts quality concerns, and then re-initiated it on or about April 14, 2014. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N49.
Steering: linkages, tie rod assembly
NHTSA campaign 11V350000 · reported July 6, 2011 · CHRYSLER GROUP LLC · 242,780 vehicles potentially affected
- The problem
- Chrysler is recalling certain model year 2008-2011 dodge ram 2500/3500 4x4, manufactured from february 14, 2008, through march 28, 2011; model year 2008-2011 dodge ram 3500 cab chassis 4x2, manufactured from february 14, 2008, through march 28, 2011; and model year 2008 dodge ram 1500 mega cab 4x4, manufactured from february 14, 2008, through august 15, 2008, because the left tie rod ball stud may fracture. This condition tends to occur during low speed parking lot type maneuvers when the customer is making a tight turn. Additionally, model year 2003-2008 dodge ram 2500/3500 vehicles may have received the affected tie rod assembly as a replacement part during normal service.
- The risk
- This condition could result in the potential loss of directional stability in the left hand front wheel, increasing the risk of a crash.
- The fix
- Dealers will inspect the tie rod ends for relative orientation and replace the left outer tie rod as required and perform a front end toe alignment as needed. This service will be performed free of charge. The safety recall began on october 3, 2011. Owners may contact chrysler at 1-800-853-1403.
What owners report
Recent complaints filed with NHTSA, shortened. These are unverified accounts from owners, not findings.
Sep 22, 2025 · Structure · 189,000 miles
The contact owns a 2010 Dodge Ram 2500. The contact stated that while performing routine maintenance on the vehicle, the contact observed that the passenger’s and driver’s side support rails on the sub frame had several sections that were severely rusted. The contact stated that there were gaps of approximately 2-feet…
Jun 3, 2025 · Electrical system
The contact owns a 2010 Ram 2500. The contact stated while driving approximately 70 MPH, the vehicle was driven over uneven pavement, causing the ignition key to fall out of the ignition. The contact coasted to the side of the road and placed the key back in the ignition and continued driving; however, the failure…
Dec 15, 2021 · Steering
This is the 3rd time this happened to me. The first time I was driving around 55 and the truck started to shake so bad I could not actually hold onto the steering wheel, and I made it to the side of the road. I thought was a flat tire and I pulled over to find nothing wrong. The second was bad as it shook so…
Oct 18, 2021 · Fuel/propulsion system
Fuel pump failed with no warning. Best One of Indy confirmed and replaced. It was parked and would not start.
May 10, 2021 · Engine and engine cooling · 43,000 miles
TL* THE CONTACT OWNS A 2010 RAM 2500. THE CONTACT STATED THAT THE EXHAUST SYSTEM REGENERATION REQUIRED NOW WARNING LIGHT WAS ILLUMINATED. THE VEHICLE WAS NOT TAKEN TO A LOCAL DEALER. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS INFORMED OF THE FAILURE AND INFORMED THE CONTACT THAT THE VIN WAS NOT UNDER RECALL…
Source: NHTSA recall and complaint data, updated October 27, 2026. Latest complaint received September 22, 2025.